Pacific Rim toys and products discussion

Discuss Vinyl Toys, Action Figures, Candy Toys, Godzilla Meat...whatever!

Moderator: Controllers

Re: Pacific Rim toys and products discussion

Postby Alpha OTS » Sat May 17, 2014 6:50 pm

Timothy wrote:The San Diego Comic Con Pacific Rim figures are the End Credits coloring..

Pics on the link: http://necaonline.com/48121/blog/san-di ... z31zjboHBu

Although that's not something I'm in the market for that does look pretty darn cool.

I found Trespasser and the new Knifehead at Toys'R'Us this week. I knew they were bigger, but seeing them in person still kind of surprised me how big they are. Although I couldn't pull the trigger on either. Trespasser's too much of a short cameo to be of interest to me and I'd really prefer a Knifehead without the bleed detail.

I'm looking at trying to fix my collapsed knee/leg Crimson Typhoon. It looks like if I put a piece of plastic behind the knee it might help keep his height for posing. Now to find that piece of plastic that'll fit and not be unsightly. I've also heard the Future floor polish is good for fixing loose joints on Transformers figures. Think that would work with a non-ball joint Neca material?
User avatar
Alpha OTS
Heisei Godzilla
 
Posts: 1229
Joined: Thu Dec 27, 2007 10:17 pm

Re: Pacific Rim toys and products discussion

Postby KingKaiju » Sun Jun 01, 2014 2:38 am

I still need to grab me a Leatherback. I wish my local TRU would've picked up the series 2 figures. Now it's going to cost me extra. Hopefully they don't stop with these, and finally give us Otachi and Slattern figures.
User avatar
KingKaiju
Godzilla Jr.
 
Posts: 222
Joined: Wed Jan 22, 2014 8:25 pm

Re: Pacific Rim toys and products discussion

Postby king_ghidorah » Sun Jun 01, 2014 10:53 am

I've got to figure Series 5 (seriously where is the news on this already??) has to include the new Gypsy 2.0, Knifehead 2.0 and Otachi. That'd be a hell of a set in my mind. I'd be tempted to buy all three of them.

I also think it'd be really cool if a company like Marmit or something made a vinyl of Knifehead and Gypsy. I'd rather see that any day of the week over a Sideshow statue personally.
FTW
User avatar
king_ghidorah
Meltdown Godzilla
 
Posts: 9917
Joined: Sat Aug 09, 2003 12:27 am
Location: Ohio

Re: Pacific Rim toys and products discussion

Postby klen7 » Sun Jun 01, 2014 12:02 pm

ANOTHER GD and Knifehead? They have already done 3+ of each! Please not until they visit Slattern, Otachi, etc
User avatar
klen7
Meltdown Godzilla
 
Posts: 7294
Joined: Wed Dec 21, 2011 11:34 pm
Location: beyond your peripheral vision

Re: Pacific Rim toys and products discussion

Postby king_ghidorah » Sun Jun 01, 2014 1:51 pm

But they still haven't gotten GD or Knifehead right IMO. The battle damaged Knifehead is close but still...we need a non-battle damaged version of that figure to have a proper Knifehead release.

GD, well, we know for a fact we are getting a 2.0 so it's coming whether you like it not.

I really, really want to see an Otachi but Slattern I could care less about. Kind of boring as a kaiju in my opinion.
FTW
User avatar
king_ghidorah
Meltdown Godzilla
 
Posts: 9917
Joined: Sat Aug 09, 2003 12:27 am
Location: Ohio

Re: Pacific Rim toys and products discussion

Postby monster of dark » Mon Jun 02, 2014 6:04 am

Rerelease for Cherno Alpha and Coyote Tango please, also Crimson Typhoon 2.0. ..? :mrgreen:
User avatar
monster of dark
Godzilla Jr.
 
Posts: 302
Joined: Mon Apr 25, 2005 1:32 am

Re: Pacific Rim toys and products discussion

Postby The Great MM » Sat Jun 07, 2014 1:31 pm

Just got my first Pacific Rim figure in the mail this week - Trespasser. I LOVE it. The detail is amazing and it has just enough articulation to strike a few poses. THIS is the type of line I've been dreaming of for Godzilla. I'll probably be getting Cherno Alpha, my favorite Jaeger, this week.
User avatar
The Great MM
Godzilla
 
Posts: 685
Joined: Thu Apr 03, 2014 7:10 pm

Re: Pacific Rim toys and products discussion

Postby The Great MM » Tue Jun 10, 2014 7:44 pm

Just so everyone knows, Toys R Us has a listing for a new Crimson Typhoon and Striker Eureka to be released on June 25.

http://www.toysrus.com/product/index.js ... age=search
http://www.toysrus.com/product/index.js ... age=search
User avatar
The Great MM
Godzilla
 
Posts: 685
Joined: Thu Apr 03, 2014 7:10 pm

Re: Pacific Rim toys and products discussion

Postby Shin_Edda_Robo!!!!! » Tue Jun 10, 2014 10:29 pm

Am I the only one who would like to see Pacific Rim non-scale Plastic Model Kits from Bandai >_>?
Image

Ultraman. Is a Dick. A Big Dick.
User avatar
Shin_Edda_Robo!!!!!
Burning Godzilla
 
Posts: 3543
Joined: Fri Aug 08, 2003 11:08 pm
Location: Bannana Republic

Re: Pacific Rim toys and products discussion

Postby The Great MM » Wed Jun 11, 2014 10:34 pm

Picked up the Cherno Alpha... LOVE it.
User avatar
The Great MM
Godzilla
 
Posts: 685
Joined: Thu Apr 03, 2014 7:10 pm

Re: Pacific Rim toys and products discussion

Postby KingKaiju » Thu Jun 12, 2014 12:26 am

I'm contemplating on getting that battle damage Knifehead. I have the series 1 version, but this one seems SO much better. Honestly, I've never been a big robot fan(outside of MEchaGodzilla) so I don't really care for the Jaegers. The Kaiju on the other hand...
User avatar
KingKaiju
Godzilla Jr.
 
Posts: 222
Joined: Wed Jan 22, 2014 8:25 pm

Re: Pacific Rim toys and products discussion

Postby Godzilla 2000 » Sat Jun 21, 2014 5:15 pm

I'm thinking of getting Trespasser. What do you guys think of it? Any common issues I should be aware of?
Image
http://www.youtube.com/user/UltramanCronos/
gila-monster wrote:You have to think outside of your fan perspective.
User avatar
Godzilla 2000
Godzilla
 
Posts: 798
Joined: Sat Sep 12, 2009 10:51 pm
Location: The Monster Graveyard.

Re: Pacific Rim toys and products discussion

Postby The Great MM » Sat Jun 21, 2014 7:09 pm

Godzilla 2000 wrote:I'm thinking of getting Trespasser. What do you guys think of it? Any common issues I should be aware of?


Not that I noticed. He's a cool figure.

My Battle Damaged Gypsy Danger and Leatherback came in yesterday. GD is amazing and even more fun to pose than Cherno Alpha, mainly do to those huge swords of hers. Leatherback... is iffy. It's an amazing mold and rather heavy toy, but do to his design, you can't pull off many poses. I was hoping to do a Kong-style chest beat pose, but the figure is off balance when just one arm is off the ground, let alone both. Still glad I scored the set for a mere $30, though.
User avatar
The Great MM
Godzilla
 
Posts: 685
Joined: Thu Apr 03, 2014 7:10 pm

Re: Pacific Rim toys and products discussion

Postby king_ghidorah » Sat Jun 21, 2014 7:15 pm

Trespasser is the one to get. Go for it. Very impressive in hand.

I'd also recommend getting Cherno Alpha too.
FTW
User avatar
king_ghidorah
Meltdown Godzilla
 
Posts: 9917
Joined: Sat Aug 09, 2003 12:27 am
Location: Ohio

Re: Pacific Rim toys and products discussion

Postby MekaGojira3k » Sun Jun 22, 2014 3:56 pm

I'm not overly fond of Trespasser but he's a better figure than the Knifehead. Mostly because his head can be moved a lot more.
"We Can't Stop Here, This is Bat Country!"
Check out the Gojicast, because if you won't...who will?
Image
User avatar
MekaGojira3k
Millennium Godzilla
 
Posts: 18288
Joined: Sat Aug 09, 2003 11:13 am
Location: Ky, USA

Re: Pacific Rim toys and products discussion

Postby The Great MM » Sun Jun 29, 2014 2:02 am

Amazon has the newly re-issued CT and SE listed for around $25. I'll be buying CT on July 11th for sure. I'm also eyeing the battle damaged Knifehead, but would much rather have a non-damaged one that is properly scaled (unlike the original release). Does anybody know if NECA has been talking about such a thing, I've heard they've been doing such about a new GD release, I imagine with her plasma cannons exposed.
User avatar
The Great MM
Godzilla
 
Posts: 685
Joined: Thu Apr 03, 2014 7:10 pm

Re: Pacific Rim toys and products discussion

Postby GiganGoji » Sun Jun 29, 2014 2:37 am

Save $5 each and pick these guys up at TRU for $19.99. The last two TRUs I went to had about a dozen of each - I don't think they'll be hard to find. Picked up a Striker Eureka - I didn't know the blades were separate, so I'll have to glue them in. Mine fall out when I move them.
Image
User avatar
GiganGoji
Heisei Godzilla
 
Posts: 1078
Joined: Fri Nov 07, 2003 2:02 am
Location: Oregon/Washington

Re: Pacific Rim toys and products discussion

Postby The Great MM » Sun Jun 29, 2014 2:45 am

I imagine FYE may also get them in. I got my Cherno Alpha there for $17.
User avatar
The Great MM
Godzilla
 
Posts: 685
Joined: Thu Apr 03, 2014 7:10 pm

Re: Pacific Rim toys and products discussion

Postby Timz » Mon Jun 30, 2014 9:41 pm

I can hear really well and I am STRONGER than ever!
User avatar
Timz
Burning Godzilla
 
Posts: 2214
Joined: Fri Jul 07, 2006 6:24 pm
Location: an alien visiting Earth. LOL!

Re: Pacific Rim toys and products discussion

Postby Godzilla 2000 » Wed Jul 09, 2014 10:23 pm

At last! Scunner has arrived and as always, I've taken plenty of pics to show him off!

The box + "axehead concept."
http://i23.photobucket.com/albums/b387/ ... G_5738.jpg
http://i23.photobucket.com/albums/b387/ ... G_5739.jpg
http://i23.photobucket.com/albums/b387/ ... G_5740.jpg

The figure.
http://i23.photobucket.com/albums/b387/ ... G_5741.jpg
http://i23.photobucket.com/albums/b387/ ... G_5742.jpg
http://i23.photobucket.com/albums/b387/ ... G_5743.jpg
http://i23.photobucket.com/albums/b387/ ... G_5744.jpg
http://i23.photobucket.com/albums/b387/ ... G_5745.jpg

The "rubber armor."
http://i23.photobucket.com/albums/b387/ ... G_5749.jpg
http://i23.photobucket.com/albums/b387/ ... G_5748.jpg
http://i23.photobucket.com/albums/b387/ ... G_5747.jpg
http://i23.photobucket.com/albums/b387/ ... G_5750.jpg

Doesnt look that bad when his arms are up.
http://i23.photobucket.com/albums/b387/ ... G_5746.jpg
http://i23.photobucket.com/albums/b387/ ... G_5753.jpg

The new parts.
http://i23.photobucket.com/albums/b387/ ... G_5758.jpg
http://i23.photobucket.com/albums/b387/ ... G_5757.jpg
http://i23.photobucket.com/albums/b387/ ... G_5751.jpg
http://i23.photobucket.com/albums/b387/ ... G_5752.jpg
http://i23.photobucket.com/albums/b387/ ... G_5760.jpg
http://i23.photobucket.com/albums/b387/ ... G_5761.jpg

Size comparisons.
http://i23.photobucket.com/albums/b387/ ... G_5762.jpg
http://i23.photobucket.com/albums/b387/ ... G_5764.jpg
http://i23.photobucket.com/albums/b387/ ... G_5765.jpg
http://i23.photobucket.com/albums/b387/ ... G_5766.jpg

Damn it, Goji!
http://i23.photobucket.com/albums/b387/ ... G_5767.jpg
Image
http://www.youtube.com/user/UltramanCronos/
gila-monster wrote:You have to think outside of your fan perspective.
User avatar
Godzilla 2000
Godzilla
 
Posts: 798
Joined: Sat Sep 12, 2009 10:51 pm
Location: The Monster Graveyard.

Re: Pacific Rim toys and products discussion

Postby klen7 » Thu Jul 10, 2014 5:35 pm

I didn't realize Scunner was out. I am planning to skip Axehead 2
User avatar
klen7
Meltdown Godzilla
 
Posts: 7294
Joined: Wed Dec 21, 2011 11:34 pm
Location: beyond your peripheral vision

Re: Pacific Rim toys and products discussion

Postby king_ghidorah » Thu Jul 10, 2014 6:34 pm

I just want Gypsy 2.0 and then I'm good.
FTW
User avatar
king_ghidorah
Meltdown Godzilla
 
Posts: 9917
Joined: Sat Aug 09, 2003 12:27 am
Location: Ohio

Re: Pacific Rim toys and products discussion

Postby The Great MM » Thu Jul 10, 2014 7:01 pm

Yeah, Axehead pisses me off. Why couldn't they do Raiju or Multavore?
User avatar
The Great MM
Godzilla
 
Posts: 685
Joined: Thu Apr 03, 2014 7:10 pm

Re: Pacific Rim toys and products discussion

Postby Timz » Sun Jul 20, 2014 5:59 pm

well just to update this thread that new PR kaiju are on the way...

Image

I wonder what will show up next? :P
I can hear really well and I am STRONGER than ever!
User avatar
Timz
Burning Godzilla
 
Posts: 2214
Joined: Fri Jul 07, 2006 6:24 pm
Location: an alien visiting Earth. LOL!

Re: Pacific Rim toys and products discussion

Postby The Great MM » Sun Jul 20, 2014 6:52 pm

Best be Mutavore, Raiju, and/or Otachi.
User avatar
The Great MM
Godzilla
 
Posts: 685
Joined: Thu Apr 03, 2014 7:10 pm

PreviousNext

Return to Toys, Figures, and Other Collectibles

Who is online

Users browsing this forum: No registered users and 0 guests