Page 1 of 1
Mothra Wing question
Posted:
Mon Jul 06, 2009 4:25 pmby Daimajin
I was going through some of my stored figures and noticed my GMK Mothra, the wing kind of folded in a bit, making in look uneven when viewing from the front, does anyone know if a hair dryer will fix this problem or is there another way to go about it. Thanks in advance!
-Al
Posted:
Mon Jul 06, 2009 4:45 pmby Destroysall
Posted:
Mon Jul 06, 2009 5:35 pmby howze01
I have had this on s few of my figures. Like my kaiser Ghidorah had one of its necks bent. I found it worked best to heat it up and then stuff it with something toi get it to its original shapre. When it cools, it should stay in the same shape.
Posted:
Tue Jul 07, 2009 12:03 amby Daimajin
Posted:
Tue Jul 07, 2009 8:30 pmby Flame of Udin
Posted:
Tue Jul 07, 2009 8:34 pmby Destroysall
Posted:
Wed Jul 08, 2009 3:13 pmby Daimajin
Posted:
Sat Jul 11, 2009 12:12 amby Ghido-Goji
Posted:
Sat Jul 11, 2009 1:06 amby kiryugoji04
Posted:
Sat Jul 11, 2009 4:46 pmby Daimajin
Good point Ghido-Goji in fact it almost seems as though the 6" FW line hold up better than the standards! my big FW Gigan started to do the splits after a while, but I fixed it maybe a similar problem kiryugoji04 had with his...
It almost seems the vinyl is softer on the Final Wars figures than any other Badai's!
Posted:
Mon Jul 13, 2009 6:01 pmby Flame of Udin
Posted:
Mon Jul 13, 2009 6:03 pmby howze01